Fal-DM41 Anti-Corrosion – Organic<\/p>\n
Description and use:
\nFal-DM41 is based on a blend of tannins for use in hot water and steam raising boilers
\nFal-DM41 provides both corrosion protection and scale inhibition b by scavenging Oxygen, forming a protective film and disrupting crystal growth.
\nGeneral Appearance:
\nColor : Dark brown liquid
\nDes pH : 5.6
\nSpecific gravity : 1.10 approx
\nBoiling Point : 225 \u00b0C
\nTreatment and Dosage Requirement:
\nFal-DM41 is normally dosed so as to maintain the boiler water at a tannin index (DM value) of 12 to 16.
\nThe correct treatment level depends on conditions such as the Operating pressure and the chemical composition of the feed water. The optimum treatment level will be specified by your Falcon ‘srepresentative to ensure the maximum program performance.
\nFal-DM41 is normally diluted and injected by means of a dosing a dosing pump or a dosage pot as appropriate to the particular plant.
\nfor injection by pump Fal-DM41 should be diluted twenty times using clean water.
\nto not corrosive in concentrated or diluted form DM41 is -Fal
\nSteel mixing tanks or dosage pumps.
\nIngradients:
\nThe chemical formula contains Sodium tannate (Tea extract) and lignin which were permitted by the FDA and WHO. Plant.<\/p>\n